'slurry pumps'

Application • Slurry pumps are used widely throughout the beneficiation section of the mining industry where most plants use wet separation systems. These systems usually move large volumes of slurry through the process. • Slurry pumps are also widely used for the disposal of ash from fossil fuel power plants. Other areas where slurry pumps are used include the manufacture of fertilizers, land reclamation, mining by dredges, and the long distance transportation of coal and minerals. • Increased global focus on the environment and energy consumption will certainly generate much wider uses for slurry pumping in years to come. Features • Makes maintenance quick easy. Replacement of wearing parts can be done in the field. With the two parts casing, it is possible to replace the worn front cover without changing the complete casing Operating range Capacity-Q- : Up to 2200 M3/hr Head-up to : Up to 70 mtr Pump Size – DN : 75 mm to 300 mm Pressure : 150psi (10.5 kg/cm2 )

At Shukan Engineering, our Thermic Fluid Hot oil Pumps are engineered to be the unwavering heart of your industrial heating systems. Far more than just a pump, this solution is the key to ensuring unmatched safety, reliability, and efficiency in your high-temperature processes. We understand that in industries relying on heat transfer, a single point of failure can lead to catastrophic downtime and safety risks. That's why our pumps are meticulously designed to handle the most demanding conditions without compromise. Engineered for Extreme Performance Our thermic fluid pumps are built to transfer heat, not absorb it. The innovative air-cooled design, featuring a unique finned shaft bracket, creates a natural thermal barrier. This proprietary design dissipates heat before it can reach the pump's bearings and mechanical seal, extending their lifespan and eliminating the need for complex, water-based cooling systems. This translates directly to lower operational costs and reduced maintenance. We utilize high-grade materials such as Ductile Iron (SG Iron) and Cast Steel (WCB) to provide exceptional resistance to thermal stress and fatigue. Every pump is a single-stage, end-suction centrifugal model, dynamically balanced for smooth, vibration-free operation, which enhances the longevity of both the pump and the motor. A Versatile Solution for Critical Industries From the chemical reactor to the bakery oven, our pumps are the cornerstone of thousands of heating systems. They are perfectly suited for: Textiles: Ensuring uniform heat for drying and dyeing processes. Paints & Coatings: Maintaining consistent temperatures for curing and blending. Plastics & Rubber: For precise temperature control in extruders and molds. Pharmaceuticals: For distillation and reactor heating where sterility and precision are non-negotiable. Choosing a Shukan thermic fluid pump means investing in a robust, low-maintenance solution that guarantees continuous, safe, and efficient heat transfer.

Shukan make impeller pump, also known as a centrifugal pump, is a type of pump that uses a rotating impeller to move fluid through the pump and into a discharge pipe. The impeller is a rotating component with curved blades or vanes that create a centrifugal force to push the fluid outward and into the discharge pipe. Impeller pumps are commonly used in industrial, agricultural, and domestic applications for moving liquids such as water, chemicals, and petroleum products. They are often used in situations where high flow rates are required, such as in irrigation systems, heating and cooling systems, and water treatment facilities. Some key features of impeller pumps include: Simple design: Impeller pumps have a relatively simple design, which makes them easy to maintain and repair. High flow rates: Impeller pumps are capable of moving large volumes of fluid, which makes them useful in situations where high flow rates are required. Low pressure: Impeller pumps typically produce relatively low pressure compared to other types of pumps, which makes them best suited for applications where moderate pressure is needed. Limited solids handling: Impeller pumps are not well-suited for pumping fluids with high levels of solids, as the solids can damage the impeller blades and reduce the pump's efficiency. Overall, impeller pumps are a common and reliable choice for many fluid transfer applications. Their simple design, high flow rates, and ease of maintenance make them a popular choice in many industries. Operating range Capacity-Q- : Up to 72 M3/hr Head : Up to 60 mlc Pump Size – DN : 25 mm To mm Temperature : Up to 200.C Speed – N - : 960/1450/2900 RPM at 50 Hz 1150/1750/3500 RPM at 60 Hz Application • Caustic Circulation, ETP, STP, Filter Press Feeding, • Slurry Transfer, Kerosene, Diesel Circulation. • Organic/ Inorganic Chemical Intermediates industries. • Food, Textile, Laminate, Cement, Steel industries. • Pharmaceutical, dyes & intermediate ,Textile Industries , Solvents Recovery & Extraction Plant • Scrubber application, Evaporation, Effluent, Water Thin & Thick Sludge in Sugar industries. • All liquor applications in Pulp & Paper, Sugar, Salt and Starch Industries. • Palm oil mills and Refineries, Food industries. • Waste water treatment plant, Starch industries. • Salt, Rubber, General industrial services etc.....

A chemical process pump is a type of pump that is specifically designed to handle and transfer various types of chemicals and corrosive fluids. These pumps are used in a wide range of industries, including chemical processing, pharmaceuticals, food and beverage, and oil and gas. Chemical process pumps are designed to withstand the harsh and corrosive nature of the chemicals being pumped. They are typically made from materials such as stainless steel, high-alloy steel, or plastics such as polypropylene or PVDF. These materials are chosen based on their ability to resist corrosion and degradation caused by the chemical being pumped. The design of chemical process pumps also includes features such as leak-proof seals, heavy-duty bearings, and robust impellers that can handle high temperatures and pressures. They can be centrifugal, positive displacement, or specialty pumps such as magnetic drive pumps. One important consideration when selecting a chemical process pump is the compatibility of the pump materials with the chemicals being pumped. The manufacturer's data should be checked to ensure that the pump is suitable for the specific chemical and operating conditions. Overall, chemical process pumps play a critical role in the safe and efficient handling of corrosive chemicals and fluids. They are designed to provide reliable and long-lasting performance while ensuring the safety of workers and protecting the environment. Speed Up to 3500 rpm Head Up to 150 mtr Size 25 mm to 300 mm Brand SHUKAN Country of Origin Made in India Motor Phase Three Phase

Effluent Treatment Plant, Sea Water, De-Watering Application Operating range Capacity-Q- : Up to 7000 M3/hr Head-up to : Up to 30 mlc Pump Size – DN : Up to 650 mm Application • SMF Pumps Are especially Used Foe pumping of Large Quantities of liquid with Impurities against low & medium Head • The Field Of Application Of these Pump Include water work municipalities Covering Pumping of Drainage water & supplying water from settings tanks • In Irrigation & agriculture for lift irrigation, in industries for circulation for Hot & Cold water , air conditional plants, power station, Text tile mils • Handling Salt Slurry, Brine Circulation • Effluent, Water Thin & Thick Sludge in Sugar industries. • Waste water treatment plant, Municipality Water Plants Materials • Graded Cast Iron • Hastelloy-B/C, Hi- Chrome • Alloy Steel • CF8(SS 304) • CF8M(SS 316) • CF3M(SS 316 L) • CD4MCU • Duplex Stainless Steel • Alloy 20 • Super Duplex Stainless Steel Features • These are end suction single stage pump, Horizontal shaft, Volute type pumps. • Suitable for Coupling with Electric Motors, I.C. Engines either directly or through Belt Drive/Gear box.

A centrifugal process pump is a type of pump that uses centrifugal force to transfer fluids. These pumps are used in a wide range of industries, including chemical processing, oil and gas, water treatment, and power generation. Centrifugal process pumps work by converting mechanical energy into fluid energy using a rotating impeller. The impeller creates a flow of fluid by centrifugal force and then directs it to the pump's discharge port. As the impeller rotates, it creates a low-pressure area that draws fluid into the pump's suction port. Centrifugal process pumps come in different types, including end-suction, split-case, and vertical inline pumps. The type of pump used depends on the application, flow rate, and head requirements. One advantage of centrifugal process pumps is their ability to handle high flow rates at relatively low pressures. They are also easy to install and require minimal maintenance. However, they may not be suitable for applications that require high-pressure pumping or handling of abrasive fluids. Centrifugal process pumps are typically made from materials such as stainless steel, cast iron, or exotic alloys. The choice of material depends on the type of fluid being pumped and its corrosive properties. Overall, centrifugal process pumps are widely used in various industries due to their reliability, ease of use, and low maintenance requirements. They are an essential component of many industrial processes, from transferring chemicals and petroleum products to circulating cooling water in power plants. Operating range Capacity-Q- : Up to 1100 M3/hr Head : Up to 150 mlc Pump Size – DN : 25 mm To 300 mm Temperature : Up to 350.C Speed – N - : 960/1450/2900 RPM at 50 Hz 1150/1750/3500 RPM at 60 Hz Application • Handling pulp stock up to 7% consistency in Pulp & Paper industries. • Handling Sugar Juice, Bagasse Slurries, Effluent, Water Thin & Thick Sludge in Sugar industries. • All liquor applications in Pulp & Paper industries. • Palm oil mills and Refineries, Food industries. • Waste water treatment plant, Starch industries. • Salt, Rubber, General industrial services etc..... • Chemical Process Industries, Fertilizer Plants • Bulk Drugs and Pharmaceutical • Heating and Air Conditioning Plants • Sugar Plants • Hot & Chill Water Supply/Chiller plant • Cement & Slurry • Agriculture, Textile • Jet Dyeing, Soft Flow Dying • Organic and Inorganic Liquids Refineries • Dyes & Intermediates • Effluent Treatment Plants/MEE Plant • Cooling Tower & Fire Fighting • Power, Steel • Volatile Liquids • Oil Extraction and Waste Materials • Graded Cast Iron • Carbon Steel(WCB) • Alloy Steel • CF8(SS 304) • CF8M(SS 316) • CF3M(SS 316 L) • CD4MCU • Nickel & Ni-Alloys • Alloy 20 • Ni-Resist • 2-1 nicl • R55 • Super Duplex Stainless Steel • Duplex Stainless Steel • Bronze • Hastelloy-B/C Features • Single stage Closed & semi open impeller • Casing wear plate for protect the volute casing. • Back pull out design • Conform to ISO 2858 dimensions • High efficiency hydraulic design • Heavy duty shaft, sleeve and bearings • Low NPSH • Single & Double Mechanical Seal Fitted • Noise and maintenance free • Steady head & capacity • One roller bearing on pump end, two angular contact ball bearing with oil lubricated • Several flange drilling options according to valid Standards. • Suitable with V-belt drive or direct coupled with a motor.

Centrifugal Process Pump: Your Ultimate Solution for Industrial Fluid Handling Shukan Engineering presents its state-of-the-art Centrifugal Process Pump, engineered to deliver uncompromising performance and reliability in the most demanding industrial environments. As a leading manufacturer and exporter, we design and produce a comprehensive range of process pumps that are indispensable for applications across the chemical, petrochemical, refinery, and fertilizer industries. Our heavy-duty industrial pumps are built to a robust standard, featuring an innovative back pull-out design that simplifies maintenance and reduces costly downtime. This allows for easy servicing of the rotating assembly without disconnecting the pump casing from the pipeline. Made from high-quality materials such as SS 304/316, Cast Iron, and Alloy 20, our pumps offer exceptional resistance to corrosion, ensuring a long and efficient service life. Shukan's Centrifugal Process Pumps are ideal for handling a wide range of fluids, including aggressive chemicals, solvents, and volatile liquids. With a design that meets and exceeds ISO and API 610 standards, you can trust our pumps for safe, consistent, and pulsation-free fluid transfer. Whether it’s for a high-volume circulation system or a critical process line, our pumps deliver a high head and flow rate with superior hydraulic efficiency, minimizing energy consumption. Choose Shukan Engineering for a durable, high-performance pumping solution that meets your exact specifications and ensures smooth, reliable operations.

India's Top Leading Source of Pulp and Paper Mill Pump Supplier. Stages Single Stage Motor Phase Three Phase Capacity Up to 1500 M3/hr Head Up to 150 mlc Type Of End Use Industrial Country of Origin Made in India In the textile industry, textile fibers are manufactured and processed using large quantities of water and energy. This demands innovative, efficient products – a perfect fit for SHUKAN pumps. In yarn production for example, the pumps are used in air treatment and air conditioning. For final treatment processes, SHUKAN supplies robust stainless steel pumps and products that are easy to clean and thus prevent damage, paint mixing and contamination. This means that SHUKAN pumps can ensure reliable and trouble-free system operation at all times – regardless of the fluid handled.

Heat Transfer Pump by Shukan Engineering A Heat Transfer Pump is a specialized centrifugal pump designed to handle the efficient transfer of hot or cold fluids in industrial processes requiring heating or cooling. At Shukan Engineering, we deliver superior-quality heat transfer pumps tailored to meet the rigorous demands of various industries, ensuring performance, durability, and reliability. Key Features of Shukan Heat Transfer Pumps Temperature Resilience: Capable of handling fluids at extreme temperatures, ranging from -100°C to +400°C Ideal for hot oil and water-based heating systems, as well as glycol and refrigerant cooling applications. Robust Construction: Built using high-grade materials like cast iron, stainless steel, and specialty alloys for durability and corrosion resistance. Heavy-duty bearings and seals designed for long operational life. Energy Efficiency: Optimized hydraulic design reduces energy consumption while maintaining high performance. Ensures cost-effective operation in large-scale industrial setups. Low Maintenance Requirements: Engineered for ease of maintenance with features like replaceable components and easy access to internal parts. Reduces downtime, enhancing productivity. Customizable Configurations: Available in horizontal or vertical mounting options. Designed to meet specific flow rates, pressures, and application needs. Applications of Heat Transfer Pumps Shukan’s heat transfer pumps are widely used across various industries, including: Chemical Processing: For conveying heat transfer fluids in chemical reactors and distillation units. Food and Beverage: Used in processes like pasteurization, brewing, and cooling. Oil and Gas: Essential in heat recovery systems and thermal oil applications. Textile and Paper: Facilitates consistent temperature control in dyeing, drying, and paper processing. HVAC Systems: Ensures efficient heating or cooling in large commercial and industrial buildings. Advantages of Choosing Shukan Heat Transfer Pumps Precision Engineering: Designed to meet international quality standards, ensuring optimal performance. Reliability: Built for continuous operation under demanding conditions. Comprehensive Support: Backed by Shukan Engineering’s expert technical support and after-sales services. Proven Track Record: Trusted by clients across India for delivering exceptional industrial pumping solutions. Why Shukan Engineering? As a leader in industrial pump manufacturing, Shukan Engineering combines innovation, expertise, and a customer-centric approach to deliver pumps that exceed expectations. Our heat transfer pumps are the result of meticulous design, precision manufacturing, and a commitment to excellence. Get in Touch Optimize your industrial heating and cooling processes with Shukan Engineering’s heat transfer pumps. Contact us today to discuss your requirements or request a quote. Contact Information: Website: Shukan Process Pump Email: shukanprocesspump@gmail.com Phone: +91-8200590058