Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048095392 (International callers) or 08048095392 (Indian callers).
Application
• Slurry pumps are used widely throughout the beneficiation section of the mining industry where most plants use wet separation systems. These systems usually move large volumes of slurry through the process.
• Slurry pumps are also widely used for the disposal of ash from fossil fuel power plants. Other areas where slurry pumps are used include the manufacture of fertilizers, land reclamation, mining by dredges, and the long distance transportation of coal and minerals.
• Increased global focus on the environment and energy consumption will certainly generate much wider uses for slurry pumping in years to come.
Features
• Makes maintenance quick easy. Replacement of wearing parts can be done in the field. With the two parts casing, it is possible to replace the worn front cover without changing the complete casing
Operating range
Capacity-Q- : Up to 2200 M3/hr
Head-up to : Up to 70 mtr
Pump Size – DN : 75 mm to 300 mm
Pressure : 150psi (10.5 kg/cm2 )
A centrifugal process pump is a type of pump that uses centrifugal force to transfer fluids. These pumps are used in a wide range of industries, including chemical processing, oil and gas, water treatment, and power generation.
Centrifugal process pumps work by converting mechanical energy into fluid energy using a rotating impeller. The impeller creates a flow of fluid by centrifugal force and then directs it to the pump's discharge port. As the impeller rotates, it creates a low-pressure area that draws fluid into the pump's suction port.
Centrifugal process pumps come in different types, including end-suction, split-case, and vertical inline pumps. The type of pump used depends on the application, flow rate, and head requirements.
One advantage of centrifugal process pumps is their ability to handle high flow rates at relatively low pressures. They are also easy to install and require minimal maintenance. However, they may not be suitable for applications that require high-pressure pumping or handling of abrasive fluids.
Centrifugal process pumps are typically made from materials such as stainless steel, cast iron, or exotic alloys. The choice of material depends on the type of fluid being pumped and its corrosive properties.
Overall, centrifugal process pumps are widely used in various industries due to their reliability, ease of use, and low maintenance requirements. They are an essential component of many industrial processes, from transferring chemicals and petroleum products to circulating cooling water in power plants.
Operating range
Capacity-Q- : Up to 1100 M3/hr
Head : Up to 150 mlc
Pump Size – DN : 25 mm To 300 mm
Temperature : Up to 350.C
Speed – N - : 960/1450/2900 RPM at 50 Hz
1150/1750/3500 RPM at 60 Hz
Application
• Handling pulp stock up to 7% consistency in Pulp & Paper industries.
• Handling Sugar Juice, Bagasse Slurries, Effluent, Water Thin & Thick Sludge in Sugar industries.
• All liquor applications in Pulp & Paper industries.
• Palm oil mills and Refineries, Food industries.
• Waste water treatment plant, Starch industries.
• Salt, Rubber, General industrial services etc.....
• Chemical Process Industries, Fertilizer Plants
• Bulk Drugs and Pharmaceutical
• Heating and Air Conditioning Plants
• Sugar Plants
• Hot & Chill Water Supply/Chiller plant
• Cement & Slurry
• Agriculture, Textile
• Jet Dyeing, Soft Flow Dying
• Organic and Inorganic Liquids Refineries
• Dyes & Intermediates
• Effluent Treatment Plants/MEE Plant
• Cooling Tower & Fire Fighting
• Power, Steel
• Volatile Liquids
• Oil Extraction and Waste
Materials
• Graded Cast Iron • Carbon Steel(WCB)
• Alloy Steel • CF8(SS 304)
• CF8M(SS 316) • CF3M(SS 316 L)
• CD4MCU • Nickel & Ni-Alloys
• Alloy 20 • Ni-Resist
• 2-1 nicl • R55
• Super Duplex Stainless Steel • Duplex Stainless Steel
• Bronze • Hastelloy-B/C
Features
• Single stage Closed & semi open impeller
• Casing wear plate for protect the volute casing.
• Back pull out design
• Conform to ISO 2858 dimensions
• High efficiency hydraulic design
• Heavy duty shaft, sleeve and bearings
• Low NPSH
• Single & Double Mechanical Seal Fitted
• Noise and maintenance free
• Steady head & capacity
• One roller bearing on pump end, two angular contact
ball bearing with oil lubricated
• Several flange drilling options according to valid
Standards.
• Suitable with V-belt drive or direct coupled with a motor.
